Aesthetic ceramic coating applied over a baked resistant substructure based on ultra hard zircon and sodium oxide.
Translucent creates special enamel pigments.
With its help, they recreate various transparency effects, color depth, or give individual features to the restoration. They are applied along the edges of the cutting edge of the crown, enhancing the effect of giving natural transparency to the enamel. When using, it is important to take into account that the mass after application must be condensed by vibrations, and excess moisture must be removed with a dry cloth.
Dentin, Enamel, Clear, Neutral, Translucent, Modifier, Chroma, Mamelon, Gingiva
Coefficient of thermal expansion |
2 firing: 9.0 x 10-6 x K-1; 4 firing: 9,0 x 10-6 x K-1 |
Conversion temperature |
500°C ±10 |
Stain Powder Dye
Coefficient of thermal expansion |
9,8 x 10-6 x K-1; |
Conversion temperature |
510°C ±10 |
Opal Opal
Coefficient of thermal expansion |
2 firing: 12.5 – 13.5 x 10-6 x K-1; 4 firing: 12,5 – 13,5 x 10-6 x K-1 |
Conversion temperature |
500°C ±10 |
| ZR (zirconium ceramics) | t° preheating | Drying time | t° of the beginning of the vacuum mode | Warm-up rate | Firing | Exposure time |
|---|---|---|---|---|---|---|
| Cleaning roasting | 500° C | 3 min. | 500° C | 65° C / min. | 980° C | 5 min. |
| 1st firing
Dentin / Enamel |
450° C | 6 min. | 450° C | 45° C / min. | 810° C | 1 min. |
| 2nd firing
Dentin / Enamel |
450° C | 6 min. | 450° C | 45° C / min. | 810° C | 1 min. |
| Glaze | 450° C | 3 min. | – | 45° C / min. | 800° C | 1 min. |
